Best custom alloy wheels factory: The hub of the original OEM factory is produced for the model, and the center hole data of the hub is exactly the same as that of the model. So you don’t need a center ring. The function of the central sheath ring (reducer ring)? When the hub is installed, the center sleeve ring mainly plays a role of positioning and fixing the hub. Make the hub center coincide with the shaft head center. It should be noted that the central sheath does not play the role of bearing. Such as the hub center hole is larger than the vehicle axle head, without the use of the center ring, the vehicle is prone to jitter when driving at high speed. It can be seen that the center ring is a very common and important part of the refitted hub. Read additional details on alloy wheels wholesale.
Gravity casting wheels:This is the most primitive processing method for aluminum alloy wheels, which can be formed by pouring high-temperature liquid metal into the mold and cooling it. This method is efficient and low cost, but the uniformity of each part of the manufactured wheel is poor, and the molecular density is relatively low, resulting in low strength, so it is not very suitable for high-strength use of passenger vehicles.
One is size: don’t blindly increase the hub. Some people increase the wheel hub to improve the performance of the car. Under the condition that the outer diameter of the tire remains unchanged, the large wheel hub is bound to match the wide and flat tire. The lateral swing of the car is small, and the stability is improved. pass by. However, the flatter the tire, the thinner the thickness, the worse the shock absorption performance, and the greater the sacrifice in terms of comfort. In addition, the tires are easily damaged if there are some roadblocks such as stones. Therefore, the cost of blindly increasing the hub cannot be ignored. Generally speaking, it is most appropriate to increase one or two sizes according to the size of the original wheel hub.
Pure electric vehicles are driven by electric motors. Unlike fuel vehicles, the engine combustion is not only loud, but also vibrates greatly. When pure electric vehicles are driving, there is no obvious shaking, and the front of the car does not need an air intake grille. Very quiet in the car. Of course, to drive a pure electric car, you need to master the switch. Many people are prone to motion sickness. Many people are used to driving a fuel car. When you start off with a kick of the switch, the power comes fast, the linearity is very strong, the speed is fast, and the back feeling is full. When braking, the switch is closed, and the power recovery function is added, and the power is lost instantly, and the head-up and nodding movements are more obvious.
The advantages of alloy wheels are light weight, high manufacturing precision, high strength, low inertial resistance, strong heat dissipation capacity, good visual effects, etc. The disadvantage is that the manufacturing process is complicated and the cost is high. The aluminum wheel hub is the product of “lightweight”, “high speed” and “modernization”, because it has many characteristics that are unmatched by steel wheels: Light weight and obvious energy-saving effect: It is well known that reducing the weight of the vehicle can save fuel, and the wheels located in the driving part with the lowest center of gravity of the vehicle are even more important to reflect the energy-saving effect of the vehicle.
Jiangjin alloy wheel manufacturers provide one-stop service starting from customizing R&D services, according to your drawings and samples to meet your special requirements, especially with our Flow Formed, automated coating line, helium leak detector system and automatic dynamic balance checking system. Customer care is our top priority job to provide all customers’ satisfaction and trust what we work for. We believe that superior customer satisfaction comes from superior product quality. Find even more information on https://www.jjjwheel.com/.
